Layer 1 Background Layer 1 Thumbnail

phyCORE®-ST32MP15x

ARM CortexTM-A7 / -M4 System on Module

Ramp up your M4 application: The module combines the main processor’s performance with a M4 MCU sub system, allowing full reuse of the STM32 Cube firmware.
SOM

Przegląd

Moduł phyCORE-STM32MP1 oferuje Secure Boot, Multiprotocol Industrial Communications, jednostkę przetwarzania grafiki 3D (Vivante - OpenGL ES 2.0), funkcje bezpieczeństwa funkcjonalnego oraz podsystem Cortex-M4 MCU, który w pełni wykorzystuje oprogramowanie STM32 Cube firmy ST w rodzinie phyCORE.

Idealnie nadaje się on do przemysłowych systemów komunikacyjnych, Edge Computing, automatyki przemysłowej, sterowania silnikami i innych aplikacji o wysokich wymaganiach i niezawodności.

  • Dual-core ARM Cortex-A7 CPU and ARM Cortex-M4 MCU subsystem
  • 3D graphic processing unit Vivante - OpenGL ES 2.0
  • Extended hardware encryption technology and secure boot

Szczegóły techniczne

SOM Alpha Kit
Processor STM32MP151A/C, STM32MP153A/C, STM32MP157A/C STM32MP157CAAC
Architecture ARM Cortex A7 + ARM Cortex M4 ARM Cortex A7 + ARM Cortex M4
Clock frequency 650 MHz + 209 MHz (M4) 650 MHz + 209 MHz (M4)
Graphics Vivante - OpenGL ES 2.0; 533 MHz (STM32MP157x only) Vivante - OpenGL ES 2.0; 533 MHz
Crypto AES, 3DES, Ciphers, SHA-1/224/256, MD5, HMAC, TRNG AES, 3DES, Ciphers, SHA-1/224/256, MD5, HMAC, TRNG
HW Security Secure boot, Secure memory and peripherals, TrustZone IPs, Tamper detection Secure boot, Secure memory and peripherals, TrustZone IPs, Tamper detection
MEMORY
NAND Flash 256 MB...1 GB SLC
(NAND or eMMC)
-
SPI NOR Flash 4 MB...16 MB QSPI 16 MB QSPI
eMMC 4 GB...128 GB
(NAND or eMMC)
8 GB
DDR3LP RAM 256 MB...1 GB 1 GB
EEPROM 4 kB...32 kB 4 kB
INTERFACES
Ethernet 10/100/1000 Mbit/s or RGMII 10/100/1000 Mbit/s
USB 1x Host, 1x OTG 2.0 1x Host, 1x OTG 2.0
U(S)ART up to 4x USART and 3x UART up to 4x USART and 3x UART
CAN up to 2x FDCAN, 1x TTCAN up to 2x FDCAN, 1x TTCAN
I²C up to 6x up to 6x
SPI (I2S) up to 6x, 2x QSPI up to 6x, 2x QSPI
MMC/SDIO up to 3x SDIO (1x for eMMC) up to 3x SDIO (1x for eMMC)
PWM 2x 16 bit PWM timer 2x 16 bit PWM timer
A/D 2x 16 bit ADC 22 channels, 2x 12 bit DAC 2x 16 bit ADC 22 channels, 2x 12 bit DAC
Display MIPI DSI-2 or parallel 18-bit or HDMI MIPI DSI-2 or parallel 18-bit or HDMI
Audio SAI, up to 3x I²S SAI, up to 3x I²S
Camera 1x Parallel 8-14 bit 1x Parallel 8-14 bit
RTC STM32MP15x internal and RV-3028-C7 external STM32MP15x internal and RV-3028-C7 external
Power Supply 5 V 9 V-36 V
Dimensions 40 x 44 mm 100 x 165 mm
Connectors Samtec 0.5 mm pitch
2x 120 pins, BGA optional
Samtec 0.5 mm pitch
2x 120 pins
Operating Temperature -40°C to +85°C -40°C to +85°C
SOFTWARE
Operating system Linux Linux
Kit Content phyCORE-STM32MP157, Carrier Board, microUSB-USB-A cable, Ethernet cable, D-Sub UART plug, D-Sub CAN plug, Power Supply, Documentation

Cena plus VAT

Module Alpha Kit
Price on request
Oferta
€ 180,00
Oferta



Download

See here for the phyCORE-STM32MP1 Download » section.