Layer 1 Background

phyBOARD®-Nunki

Thermal Imaging Kit

  • based on phyCORE-i.MX 6
  • phyCAM-P, phyCAM-S+, MIPI
  • Linux 4x
  • Thermal camera VM-050-050-0
  • NXP i.MX 6 processor
CAM

Overview

Phytec has designed the phyBOARD-Nunki especially for image processing applications. Combining this platform with a thermal imaging camera opens up completely new fields of application. In addition, there is the possibility to use the second free camera interface with a conventional color or monochrome camera.

In combination with the other interfaces of an embedded controller such as the i.MX 6, this creates a very flexible and powerful system that can be used in a wide range of application areas.

The kit includes a phyCAM-P thermal camera VM-050-50-0. The camera comes with a fixed 5 mm lens. Depending on the application, other phyCAM thermal or array cameras can be used. 

Kit Content

Kit "KPB-02301-Video-L03":

  • phyBOARD-Nunki i.MX 6
  • phyCORE-i.MX 6: ARM Cortex-A9 based Single-Board-Computer, 4x 1 GHz, 1 GB DDR, 1 GB Flash
  • 1 x VM-050-050-0 (Thermal camera 32x32)
  • Including lens, germanium, f=5mm (firmly installed)
  • HDMI and LVDS connector, color, with touch
  • Embedded Linux BSP
  • Preinstalled Image
  • Serial USB cable, camera cable 30 cm, power supply
  • LiveUSB flash drive with drivers, demos, examples
  • Start-up guarantee

Technical Details

Features\Name Thermal Imaging Kit
Product Rapid Development Kit
Module phyCORE-i.MX 6
SOM Mounting Connector insertion
CPU i.MX 6 Quad
Clock Frequency 4x 1 GHz
Memory 1 GB NAND,
1 GB RAM, 16 MB NOR, 4 kB EEPROM
INTERFACES
Ethernet 1x 10/100/1000 Mbit/s
USB 1x Host, 1x OTG
Serial via microUSB
CAN 1x
Digital I/O via Expansion Connector
Audio via Expansion
PCIe 1x miniPCIe
Camera Interface 2x, both with phyCAM-P or phyCAM-S+ or one with MIPI CSI-2
Camera 1x thermal camera 32x32 VM-050-050-0
Lens f=5.0 33° (Germanium)
Display LVDS, Parallel
Backlight via Connector
Resistive Touch 4-Wire
Capacitive Touch via USB, I²C, UART
HDMI 1x
Mass Memory microSD Card Slot, SATA
EXPANSION & CONFIGURATION
Expansion Bus USB, UMI, Power Control Signals (Reset, Power-Good...)
JTAG on Connector
User Control Elements Reset Button
Boot source SD Card, NAND, eMMC, SATA,
USB Host
RTC RTC with Gold Cap Backup
Power Supply 12-24 V
Dimensions 150 x 75 mm
Temperature Range -25°C...+85°C
SOFTWARE
Operating System Linux
Distribution Yocto
Kit Content phyBOARD-Nunki
with phyCORE-i.MX6 Quad, Camera VM-050-050-0 incl. 5mm lens, Cables,
Power Supply

Pricing plus VAT

Thermal Imaging Kit € 398,00
Oferta




Upgrade Kit 7'' Display - capacitive € 116,00
Oferta




CAN Adapter Pin auf DSUB9 € 3,00
Oferta




Can be used with:

- all phyCAM-S(+) cameras, for examples:

- all phyCAM-P cameras, for example:

- all Thermal Imaging cameras: